Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 10, 2021 6:30:25 GMT
My case is now in Holland. I hope it arrives soon...
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
Member is Online
|
Post by Bigman80 on May 10, 2021 8:00:06 GMT
My case is now in Holland. I hope it arrives soon... Fingers crossed K. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 10, 2021 19:15:34 GMT
The soft start has also arrived in France.
There is a risk that all the parts will be here ready for the weekend, and I won’t be.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
Member is Online
|
Post by Bigman80 on May 10, 2021 20:21:53 GMT
The soft start has also arrived in France. There is a risk that all the parts will be here ready for the weekend, and I won’t be. Ah. Well, I'd rather have the bits and no time, than time and no bits. It'll all fall into place soon I feel |
|
|
|
Post by antonio on May 11, 2021 0:36:38 GMT
Spot on Oli, patience is a virtue Cagey  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 11, 2021 6:58:08 GMT
I am being patient.
I bought the PCB ages ago....
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
Member is Online
|
Post by Bigman80 on May 11, 2021 7:04:29 GMT
I am being patient. I bought the PCB ages ago.... Hahaha, yes you did! You'll soon be up and running. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 11, 2021 18:44:49 GMT
The soft start has arrived. What do I need to do to modify it BB3 stylee?
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
Member is Online
|
Post by Bigman80 on May 11, 2021 19:52:16 GMT
The soft start has arrived. What do I need to do to modify it BB3 stylee? Take the black thermistors out, carefully I'll send a pic of how to mod it tomorrow. You need to keep two in good condition. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 12, 2021 9:48:11 GMT
What size are the holes in the PCB?
I think I may need some bigger standoffs.
I forgot to measure them, and I am now at work...
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
Member is Online
|
Post by Bigman80 on May 12, 2021 10:48:52 GMT
What size are the holes in the PCB? I think I may need some bigger standoffs. I forgot to measure them, and I am now at work... M3 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 12, 2021 13:00:05 GMT
Cool. I have those.
Thanks.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2021 8:22:17 GMT
The soft start has arrived. What do I need to do to modify it BB3 stylee? Take the black thermistors out, carefully I'll send a pic of how to mod it tomorrow. You need to keep two in good condition. The 4 thermistors have been carefully removed. All 4 look ok.... |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2021 15:12:56 GMT
BB3 soft start mod complete.
I have also tinned the RCA sockets up, as they are quite beefy, so I need to break out the big iron for this job.
Now I just need the case, and a bit of time to make some holes in it.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
Member is Online
|
Post by Bigman80 on May 13, 2021 15:26:39 GMT
BB3 soft start mod complete. I have also tinned the RCA sockets up, as they are quite beefy, so I need to break out the big iron for this job. Now I just need the case, and a bit of time to make some holes in it. Good man. Looking forward to seeing it when it is done 😁 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2021 16:40:42 GMT
I am looking forward to hearing it....
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 14, 2021 15:30:46 GMT
The case arrived today.  I am thinking of the pictured layout, but need to finalise the position of the power switch etc. I think the soft start will be turned through 90 or 180 degrees to make feeding the power switch easier. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 14, 2021 16:44:10 GMT
I have fitted the power switch.
I always dread this, as it is a big hole to drill.
It has dawned on me that I probably need a different switch, as this one has a 12V led. Not sure if I can find 12V DC (or lower) anywhere suitable in the case.
It will do for now though.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
Member is Online
|
Post by Bigman80 on May 14, 2021 17:02:23 GMT
I have fitted the power switch. I always dread this, as it is a big hole to drill. It has dawned on me that I probably need a different switch, as this one has a 12V led. Not sure if I can find 12V DC (or lower) anywhere suitable in the case. It will do for now though. Can take 7v off the cap In front of the big heatsink. That's what I do. I also put an extra 1k resistor in and it stops the LED beaming! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 14, 2021 18:18:14 GMT
 It should look good when finished. The Traffo is securely mounted, the PCBs are mounted. Tomorrow I need to fit the RCA sockets, MM/MC switch, earth connector, and wire up the power. Special note to self: I need to earth the Soft Start, HV central connector, traffo, and IEC inlet |
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
Member is Online
|
Post by Bigman80 on May 14, 2021 19:48:08 GMT
View AttachmentIt should look good when finished. The Traffo is securely mounted, the PCBs are mounted. Tomorrow I need to fit the RCA sockets, MM/MC switch, earth connector, and wire up the power. Special note to self: I need to earth the Soft Start, HV central connector, traffo, and IEC inlet Yep, gonna look nice that. |
|
|
|
Post by antonio on May 15, 2021 2:37:29 GMT
I like the clean simple look, very rare I would go with something blingy, there are exceptions of course, nearly there now though, will it be worth the time and effort?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 15, 2021 7:42:13 GMT
I like the clean simple look, very rare I would go with something blingy, there are exceptions of course, nearly there now though, will it be worth the time and effort? I hope so! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 15, 2021 9:51:48 GMT
I had about an hour free, so I have fitted the RCA sockets, MM/MC switch and earth post to the back panel.  All I have left to do now is to wire it up. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 15, 2021 9:54:49 GMT
As this uses a 50VA traffo, I am assuming I can use something as low as a 0.315A fuse?, which gives me a 50% overhead for inrush.
This seems a little low to me, and I think it is likely to blow?
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
Member is Online
|
Post by Bigman80 on May 15, 2021 11:10:04 GMT
As this uses a 50VA traffo, I am assuming I can use something as low as a 0.315A fuse?, which gives me a 50% overhead for inrush. This seems a little low to me, and I think it is likely to blow? I use 500mA slow blow ceramic fuses these days |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 15, 2021 16:14:39 GMT
The more I look at the case sat on the rack, the more I think it need a tasteful logo on.
Not sure to go for a full on BB sticker, as this is a DIY version, or some discrete text similar to what is on the front of my 686.
I also need to lose the stainless bolts, but I think I have some black ones kicking about.
|
|
|
|
Post by antonio on May 16, 2021 1:31:18 GMT
Replacing the bolts with black ones is a good idea.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2021 9:15:08 GMT
I have fitted the power switch. I always dread this, as it is a big hole to drill. It has dawned on me that I probably need a different switch, as this one has a 12V led. Not sure if I can find 12V DC (or lower) anywhere suitable in the case. It will do for now though. Can take 7v off the cap In front of the big heatsink. That's what I do. I also put an extra 1k resistor in and it stops the LED beaming! What is the component of the CAP please? I want to avoid any mistakes. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2021 9:20:29 GMT
Another question, I assume that the loading plugs are kind of in the signal path, so should I also use decent cable here?
|
|
