Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 21, 2018 18:38:06 GMT
Please forgive me for asking such daft question.
Are there some CD Players. That sound similar like some of the well known turntables? When I say similar, I mean tone wise.
S.
|
|
|
Post by dsjr on May 21, 2018 18:39:36 GMT
I should bloody well hope not!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 21, 2018 18:43:40 GMT
If get some yes from others. Please don't bite our ankles, Dave S.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
|
Post by Bigman80 on May 21, 2018 19:00:52 GMT
Might scare you off it, but CDX has the attack of the Xerxes. CDI is more analogue though. Some have compared it to LP12 and I can see something in it. Marantz players have always had something "Fisher Price" about them too!
|
|
|
Post by dsjr on May 21, 2018 20:19:20 GMT
If get some yes from others. Please don't bite our ankles, Dave S.
Not sure I could get down to bite anyone's ankles Shane, I'd never get up again
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 22, 2018 1:10:30 GMT
Might scare you off it, but CDX has the attack of the Xerxes. CDI is more analogue though. Some have compared it to LP12 and I can see something in it. Marantz players have always had something "Fisher Price" about them too! Yeah but the Xerxes is smoother though. S.
|
|
|
Post by antonio on May 22, 2018 4:36:55 GMT
I listened to one yesterday that was designed to be more 'analogue sounding' - Pink Triangle Ordinal.
|
|
|
Post by dsjr on May 22, 2018 6:46:46 GMT
I found the PT digital stuff rather foggy at the time. The early AVI CD player actually had more focus and 'weight' I thought (a pal of mine borrowed the PT dac with a variety of filter modules).
Digital has an excellent advantage at high frequencies where there's usually no compression if it's recorded right. Analogue/vinyl will always alter this and without really slugging the electronics by adding digital processing, I'm not sure you can mimic it.
What you need to do Shane is to smarten up vinyl to sound more like the original recordings - and 'digital' these days is about as close as it gets as long as the mastering engineer hasn't ballsed them up.
My old Micro Seiki CD-M2 set standards when new and used from its balanced outputs with the cables provided. It was in a different world from a CDS, which sounded contrived and coloured in comparison (my own machine used to be the Ab Sounds demonstrator judging by a couple of marks here and there I recognised years later). Wide and deep soundstage no Linn based turntable could come anywhere near to I remember.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
|
Post by Bigman80 on May 22, 2018 7:27:58 GMT
I have used this analogy before, but vinyl and CD are like butter and margarine to me. The best players get closer to lettimg you ignore that hint of artificiality and don't leave too much of an aftertaste. These days I'm more used to them too. I make no claims of objective superiority and what I hear as "real" may well be distortion, crosstalk or some other foible. All I know is that it sounds slightly more "real" to me. But then I haven't heard some of the very best players.
I remember doing an A/B comparison witn a CDI and a Xerxes/modded Rega/Karma. Tonally very close, just a biit of bass definition, sparkle and sense of living breathing musicians missing from the CDI. Not enough to crow about unless you compared.
Not that it matters, because if I could only run one medium it would be CD. Price and availability of discs is just too much of a one sided affair. Besides, I couldn't be bothered with the faff of playing a record all the time, especially turning it over. Then there's end of side distortion, cleaning stylus and vinyl etc etc. All fine when you are in the mood, but CD is much easier,
|
|
|
Post by dsjr on May 22, 2018 13:19:11 GMT
I apologise sincerely for my strong comments. For me, it's cut and dried after perception-changing experiences up at Linn and at the Decca mastering studios, once in Belsize Road NW6, but my typing speed doesn't keep up with the rapid fire thoughts spilling out, so I come across as too assertive and insistent, my findings coming over as final and non negotiable.
Can I drift a bit to give some background I haven't put elsewhere?
When I started at KJ Watford in 1974, we had some master tape copies of commercial albums(from EMI, Virgin and Angus McKenzie) including DSOTM, Halleluwah! by Can, 'sides' from Mandingo albums and Tubular Bells and Ommadawn later on, because vinyl didn't sound 'good enough' to demonstrate the gear as well (early 70's mentality) although of course we did play records and even sell some choice classical DG vinyl titles too! When I moved to the flagship W1 store in '77 where most of the 'decent gear' had gone to, most of these tapes had been filched (along with some of the boxed stock being slowly siphoned off when nobody was looking, but I digress) and the deck of choice was a Micro Seiki DDX1000 with slimline arms (Black Widow and AT 1120? type) and AT20SLa or Stanton 881S cartridges. The Sony 8750 was judged the next tier down although sonically, I loved it, the arm sitting on twin points for vertical movement and conventional ball races for horizontal motion- oil filled mat too. These decks didn't sound plump in the bass and even when the LP12/G707/Supex blew all these others away in sales and attention, the LP12/Grace 707 of this time didn't sound as bloated or 'fruity' at all until the Ittok ruined it for a few years by over-juicing up the bass... Later LP12 updates to the sub chassis and arm-board ruined the Grace sound, which went thin and scratchy on an LP12 I remember.
I'm effin' well going off on one and I apologise again. When CD started, the Sony 101 was ok, but the top loading Philips players gave even me a headache after an hour or so. The LP12 had the Karma by this time and the sound really was dull once run in (measured it too). Balance a stereo around a 1983 LP12/Ittok/Karma and any CD player would sound terribly fatiguing and thin toned. I believe that today, these excess differences have all but disappeared and where really high quality vinyl is concerned, it's the shitty bits of black plastic we have to play that limits it..
Does any of the outpouring above help in any way? That £5 dac with £39 Chinese linear supply sounds bloomin' excellent to me, if not quite as 'expansive' as red-book digital at its best and my gash beloved Dual decks are huge fun, so I can forgive any lack of sonic scale or refinement. A modern Rega 3 with careful choice of cartridge and careful siting should out-perform an old LP12 (pre mid 80's) now I think and a Planar 6/Ania/Fono MC was incredibly good in terms of life, musicality and overall balance I thought.
Andrew, if you want to delete this please do so, or maybe move elsewhere. I'm typing this over lunch as there's on the telly and I need to go back to do some more work.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
|
Post by Bigman80 on May 22, 2018 13:58:19 GMT
Hi Dave, no need to apologise ever. Your experiences are the truth for you and if I or others had been there with you, we would likely also feel the same.
Sometimes hearing something does change your perception forever and you cannot go back or "unhear" it.
I have never felt the same about Naim amps since I compared them directly with Linn and Exposure amps, via a CDI front end and SBLs. It kinda stopped me buying them. Before that I would've thought them superior to the Linns and equal to the Exposures.
|
|
|
Post by dsjr on May 22, 2018 14:06:33 GMT
My memories of Farlowe era Exposure were in comparison at a customer's place with CB Naim and the two were 'rather different.' We had an Exposure X integrated in and maybe it was faulty, but it sounded very harsh indeed. A XV I have memories of having in for a dem was fine I think.
So, all I can say is whether I've heard many examples or 'just the one in a dem.'
Back on topic, in the past, I think you needed to spend a bit on a CD player to get the 'authority' I think Shane was hinting at. Maybe this quality has crept down in price and I personally feel it has. You know, a good set of interconnects (TIS in my experience but I know others) can do wonders for some otherwise good CD players just needing a little 'tidying up' sonically.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
|
Post by Bigman80 on May 22, 2018 15:21:47 GMT
I'm sure you can work wonders with the sort of PSU upgrades Stu has done on players. The PSU seems to play a big part in CD replay. Less so than the chip technology for me.
|
|
|
Post by dsjr on May 22, 2018 16:48:02 GMT
I'm not sure how Stu went about it, but it's my vibe that Naim again hobbled the bloody thing so they could sell an 'upgraded' player for double the money or more. The one-grand AVI player I had in the early 90's had eleven regulated supplies in it, right next to the circuit parts that needed them. think how much more money AVI could have made with a fifty quid burndy (or however much it was) and all these regulators in a separate box - according to people that should know these things, it would have performed worse too... Modern machines, the few that are left, seem very much simpler inside now, so *shouldn't* need so much faff (famous last words).
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 22, 2018 18:34:44 GMT
Yes they hobbled em good and proper. Everything had its own lm317 reg though. Not always right next to the chip though as a hint of pcb track resistance works wonders and can sometimes stop the reg "going off on one".
Mostly what i did was trace the circuit, work out which things could be powered independently and then cut the power the power rail tracks to enable it. A few new psu's one for a new flea powered tentlabs clock, 3 for the dac and a couple for the anolgue stage which left the original 200va transformer powering just the digital stuff prior to the dac. I am going to try adding another 4 psu's to the anologue stage so each opamp gets its own.
I also played with the regulators on most of the chips in accordance with the tips on acoustica.org. In fact mod no.7 on the acoustica cd3.5 mods page is how to correct naim's "hobble" of this machine.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
|
Post by Bigman80 on May 22, 2018 18:50:20 GMT
Yes they hobbled em good and proper. Everything had its own lm317 reg though. Not always right next to the chip though as a hint of pcb track resistance works wonders and can sometimes stop the reg "going off on one". Mostly what i did was trace the circuit, work out which things could be powered independently and then cut the power the power rail tracks to enable it. A few new psu's one for a new flea powered tentlabs clock, 3 for the dac and a couple for the anolgue stage which left the original 200va transformer powering just the digital stuff prior to the dac. I am going to try adding another 4 psu's to the anologue stage so each opamp gets its own. I also played with the regulators on most of the chips in accordance with the tips on acoustica.org. In fact mod no.7 on the acoustica cd3.5 mods page is how to correct naim's "hobble" of this machine. Anyone with even the slightest interest should check out Stu's threads on PFM. Some of the most fascinating and valuable threads on any forum. I still live in hope of usingbtenm as a learning experience. My CD3 probably isn't the right vehicle so it will be sold when I get myself turned around.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 22, 2018 19:09:50 GMT
CD3 is very different to the 3.5. Split rail psu's, different transport, different dac and other chips. Cant attach a psu for the anologue stage (you can on the 3.5) but then once you know what you are doing then anything is possible.
Martin Clark helped me loads in the early stages along with his website acoustica.org. My big CD3.5 thread is a long one and probably a bit boring at times. Still work to do on it Andrew. I have an unmolested 3.5 too and a spare transport to keep me going well into the future.
CD3's are highly sought after so you should get a good price for it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 22, 2018 22:20:58 GMT
CD3 is very different to the 3.5. Split rail psu's, different transport, different dac and other chips. Cant attach a psu for the anologue stage (you can on the 3.5) but then once you know what you are doing then anything is possible. Martin Clark helped me loads in the early stages along with his website acoustica.org. My big CD3.5 thread is a long one and probably a bit boring at times. Still work to do on it Andrew. I have an unmolested 3.5 too and a spare transport to keep me going well into the future. CD3's are highly sought after so you should get a good price for it. CD3 is a good wee player as stock, but I would love to have heard an Avondale CD3
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 22, 2018 22:23:41 GMT
I apologise sincerely for my strong comments. For me, it's cut and dried after perception-changing experiences up at Linn and at the Decca mastering studios, once in Belsize Road NW6, but my typing speed doesn't keep up with the rapid fire thoughts spilling out, so I come across as too assertive and insistent, my findings coming over as final and non negotiable. Can I drift a bit to give some background I haven't put elsewhere? When I started at KJ Watford in 1974, we had some master tape copies of commercial albums(from EMI, Virgin and Angus McKenzie) including DSOTM, Halleluwah! by Can, 'sides' from Mandingo albums and Tubular Bells and Ommadawn later on, because vinyl didn't sound 'good enough' to demonstrate the gear as well (early 70's mentality) although of course we did play records and even sell some choice classical DG vinyl titles too! When I moved to the flagship W1 store in '77 where most of the 'decent gear' had gone to, most of these tapes had been filched (along with some of the boxed stock being slowly siphoned off when nobody was looking, but I digress) and the deck of choice was a Micro Seiki DDX1000 with slimline arms (Black Widow and AT 1120? type) and AT20SLa or Stanton 881S cartridges. The Sony 8750 was judged the next tier down although sonically, I loved it, the arm sitting on twin points for vertical movement and conventional ball races for horizontal motion- oil filled mat too. These decks didn't sound plump in the bass and even when the LP12/G707/Supex blew all these others away in sales and attention, the LP12/Grace 707 of this time didn't sound as bloated or 'fruity' at all until the Ittok ruined it for a few years by over-juicing up the bass... Later LP12 updates to the sub chassis and arm-board ruined the Grace sound, which went thin and scratchy on an LP12 I remember. I'm effin' well going off on one and I apologise again. When CD started, the Sony 101 was ok, but the top loading Philips players gave even me a headache after an hour or so. The LP12 had the Karma by this time and the sound really was dull once run in (measured it too). Balance a stereo around a 1983 LP12/Ittok/Karma and any CD player would sound terribly fatiguing and thin toned. I believe that today, these excess differences have all but disappeared and where really high quality vinyl is concerned, it's the shitty bits of black plastic we have to play that limits it.. Does any of the outpouring above help in any way? That £5 dac with £39 Chinese linear supply sounds bloomin' excellent to me, if not quite as 'expansive' as red-book digital at its best and my gash beloved Dual decks are huge fun, so I can forgive any lack of sonic scale or refinement. A modern Rega 3 with careful choice of cartridge and careful siting should out-perform an old LP12 (pre mid 80's) now I think and a Planar 6/Ania/Fono MC was incredibly good in terms of life, musicality and overall balance I thought. Andrew, if you want to delete this please do so, or maybe move elsewhere. I'm typing this over lunch as there's on the telly and I need to go back to do some more work. I'm glad you didn't delete it! Not everyone enjoys one line posts It's a forum for people with a passion and it's nice to see that passion in your posts, Dave.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 24, 2018 16:14:56 GMT
Naim? Why bother. I've heard one or two of their models sounding good in a non Naim set up but frankly there is better for cheaper. I think after all the mods in terms of power supply you are stuck with the basic character. I recently purchased an Oppo 205 before they end production as I need something to handle hi-res formats as well as video in the long run that has analogue out. Pretty gobsmacked how good this is as a CD player and pretty well would justify it's price on that alone. For CD only the Cambridge CXC paired with a decent DAC is still available.
Actually though I am mainly an analogue fan my approach has been to look at TTs that sound rather more like digital in terms of speed accuracy / timing. Something that doesn't colour the music as older Lp12's did. For whatever reason (likely sampling rates) analogue can give a more believable expansive presentation but it shouldn't be adding warmth to the recording. Really annoys me when warmth is continually put forward by new vinyl enthusiasts as a reason for their preference. Adding warmth to Cd players to make them more 'analogue' is just wrong. A reason it appears for the use of valves in some digital players. I just don't see a place for valves in digital though I'm told the valve version of Rega's top player is better sounding than the standard one.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
|
Post by Bigman80 on May 24, 2018 17:44:12 GMT
Although I do like Naim CD players, I was shocked at how much better I found the Copland 266. Although I haven't compared it, I'd expect my Sonneteer to do well in a bake-0ff.
The Oppo stuff looks gorgeous and I know Paul (Doc) Stewart loves them. He must have seen and heard most things under the sun and still chooses Oppo.
I couldn't agree more about pitch stability. It's a deal-breaker for me when it comes to turntables. It was the first the that stood out when I compared LP12 and Xerxes, the Linn was all over the place. If a deck can't keep constant and correct speed, it will never sound right. the best belt drives should sound as accurate as a DD in this respect.
|
|
|
Post by dsjr on May 24, 2018 20:39:31 GMT
The 266 is a classic lean-n-clear sound as I remember (I loved it with ATC's and sold one to a friend who kept it for years). I'd suspect it's very different to the CD-I for instance.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
|
Post by Bigman80 on May 24, 2018 20:55:28 GMT
The 266 really surprised me because I found it both lively and dynamic. In these aspects it was the antithesis of the CSA14 I had. The thing I really loved about it was the clarity it had. It made my CDX sound poor in comparison and I had enjoyed the CDX until that point. I never compared it to CDI although I have had a few of them. I'd expect similar or greater differences in clarity, although the CDI would probably still have an edge in tunefulness and rhythm. I'd have another 266 tomorrow if price and condition were right.
|
|
|
Post by dsjr on May 25, 2018 9:48:08 GMT
The 266 was £1200 at the time I think (better finished and nicer to use than the excellent sounding AVI S2000 CD player was). The Naim mwas double the price and no better - maybe 'different' but the CDX was nowhere near as good until an even more expensive power supply was added. effin' rip-off merchants
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 25, 2018 10:12:38 GMT
Was the 266 a Jammy recommendation ?
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
|
Post by Bigman80 on May 25, 2018 11:46:57 GMT
Was the 266 a Jammy recommendation ? No, I didn't know he had one tbh. I bought it on looks and expected to be disappointed. It was cheap enough to try without loss. I had recently owned a CSA14 which wasn't my thing at all and I expected the 266 to be similar. Finding it more dynamic than a CDX as well as better in every other respect was a real shock. I remember Martin T saying it had an unusual SACD chip in it that only shows up in expensive players. Apparently it affects the sound for CD too, so maybe it was that element which elevated it. I sold it because I was coming abroad and I wanted a slimmer player to pack more easily. That's how I ended up with the CD3, although I went and bought a Sonneteer Byron too, so I may as well have kept the Copland!
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
|
Post by Bigman80 on May 25, 2018 11:50:39 GMT
The 266 was £1200 at the time I think (better finished and nicer to use than the excellent sounding AVI S2000 CD player was). The Naim mwas double the price and no better - maybe 'different' but the CDX was nowhere near as good until an even more expensive power supply was added. effin' rip-off merchants I had no idea what they sold for. That's one hell of a player for £1200. On looks and build alone it's worth more when compared to others. Given how it sounded to me, I'd happily call it a bargain. Copland stuff is actually made for them in a factory that makes military grade electronics. I think it shows too.
|
|
|
Post by dsjr on May 25, 2018 15:46:01 GMT
The earlier 288 floated my boat as well, supremely musical as per the better more expensive players and it had a proper VRDS mechanism too. This went when certain chips became unavailable sadly. The later 289 sounded like a bigger 266, so really good in my opinion.
|
|
Bigman80
Grandmaster
The HiFi Bear/Audioaddicts/Bigbottle Owner
Posts: 16,398
|
Post by Bigman80 on May 25, 2018 20:37:08 GMT
289 sounds right up my street. But then I'm pretty wedded to the Sonneteer amp and I like the matching pair thing.
|
|
|
Post by dsjr on May 26, 2018 9:51:02 GMT
I like the Sonnteer products I've heard and wish they had greater 'market presence.' the UK audio market is effed though, products priced for the far eastern status-conscious buyers now far too expensive here for most, hence the huge market in used gear now.
|
|