Post by robbiegong on Oct 8, 2022 14:11:33 GMT
Beautiful and rare - Sansui Au a707DR Integrated amplifier.
Has been my pride and joy for the past four years and if I could run two set-ups this would be going nowhere. Unfortunaely I cant and need to recoup what I've spent on the Plinius 9200, that has replaced it.
Sound is excellent in my view, balanced and detailed, non fatiguing, not hyper but properly analogue. It's brought me a lot of musical pleasure.
Very very rare genuine 230v UK version - I'm led to believe that there were literally less than a handful made and shipped here - most being 100v for Japan, US market and 220v for Europe.
Has been cherished and kept in near minty order - a beautiful chunk of an amp.
Solid build weighing in at nearly 23kgs.
Alan-Firebottle, looked it over in 2020 and also fitted some modern fets in the phono input stage. It also had a service in June this year, which included mute switch and speaker relay switch repairs.
Amp is in perfect working order.
Also on Ebay - 15 watchers (tyre kickers)
£900 - PayPal, friend, family, gift
Local pickup London area - I do have the original box, polystyrene, and would be double boxed if courier required.
Specifications
Power output: 130 watts per channel into 8Ω (stereo)
Frequency response: 1Hz to 200kHz
Total harmonic distortion: 0.003%
Damping factor: 150
Input sensitivity: 0.3mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 70dB (MC), 88dB (MM), 110dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 460 x 163 x 450mm
Weight: 22.5kg
Year: 1990
257 by
261 by
255 by
707dr Rear by
252 by
250 by
Has been my pride and joy for the past four years and if I could run two set-ups this would be going nowhere. Unfortunaely I cant and need to recoup what I've spent on the Plinius 9200, that has replaced it.
Sound is excellent in my view, balanced and detailed, non fatiguing, not hyper but properly analogue. It's brought me a lot of musical pleasure.
Very very rare genuine 230v UK version - I'm led to believe that there were literally less than a handful made and shipped here - most being 100v for Japan, US market and 220v for Europe.
Has been cherished and kept in near minty order - a beautiful chunk of an amp.
Solid build weighing in at nearly 23kgs.
Alan-Firebottle, looked it over in 2020 and also fitted some modern fets in the phono input stage. It also had a service in June this year, which included mute switch and speaker relay switch repairs.
Amp is in perfect working order.
Also on Ebay - 15 watchers (tyre kickers)
£900 - PayPal, friend, family, gift
Local pickup London area - I do have the original box, polystyrene, and would be double boxed if courier required.
Specifications
Power output: 130 watts per channel into 8Ω (stereo)
Frequency response: 1Hz to 200kHz
Total harmonic distortion: 0.003%
Damping factor: 150
Input sensitivity: 0.3mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 70dB (MC), 88dB (MM), 110dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 460 x 163 x 450mm
Weight: 22.5kg
Year: 1990
257 by 261 by 255 by 707dr Rear by 252 by 250 by 
