|
|
Post by electronumpty on Oct 20, 2021 9:51:29 GMT
Hi curious about these from the likes of Dexa and Bellason. Anyone tried these and do they make much of a difference?
Obviously depends on circuit, how used etc but reading suggests theyare of use in pre amps and dacs etc ,not so much power amps.
Anyway think I might ry one in my DCB1 to see if it makes a difference, only 30 quid.
|
|
|
|
Post by misterc on Oct 20, 2021 11:35:52 GMT
Always worth a try with these items, can give mixed results just carefull positioning will help as long as there are no ultra low esr decoupling capaitors near that reg you wish to replace
|
|
|
|
Post by electronumpty on Oct 20, 2021 13:38:49 GMT
Always worth a try with these items, can give mixed results just carefull positioning will help as long as there are no ultra low esr decoupling capaitors near that reg you wish to replace Thanks, looks like its worth a shot so I'll give it a go. Easy enough to reverse if it doesn't work out. |
|
|
|
Post by sq225917 on Oct 20, 2021 18:38:38 GMT
Not all regs are built equally and not all circuits require the same things from their supplies.
That said, the new belleson regs are actually very good. The spx measure very well.
Is it a boggo b1 or a hot rod?
|
|
|
|
Post by electronumpty on Oct 20, 2021 19:27:16 GMT
Turbocharged, 850 from memory.
|
|
