Post by pete on Feb 21, 2024 19:30:14 GMT
Decided that it is time to work on my jukebox that has just been used as a bluetooth speaker and giant light for too long.
One of the many issues I have is the turntable is running at the wrong speed, between 35 and 37 RPM, and it randomly moves between these speeds! Must be the motor I decided, so went about stripping it down with the thought of giving it a good clean, check bearings, lubricate and reassemble.
Thought some might like to see what a 'real' turntable motor looks like... its like something out of a giant piece of machinery!!
And on the inside it is looking like it has seen some life!!
After a good clean up and reassembly it is back in action and the turntable is running at 44.8 RPM, close enough for me.
One of the many issues I have is the turntable is running at the wrong speed, between 35 and 37 RPM, and it randomly moves between these speeds! Must be the motor I decided, so went about stripping it down with the thought of giving it a good clean, check bearings, lubricate and reassemble.
Thought some might like to see what a 'real' turntable motor looks like... its like something out of a giant piece of machinery!!
And on the inside it is looking like it has seen some life!!
After a good clean up and reassembly it is back in action and the turntable is running at 44.8 RPM, close enough for me.
