Post by alit on Nov 26, 2019 16:14:39 GMT
I bought this to use in my previous car, it's been unused since I changed motors. Great sounding bit of kit, many comments online on it being one of the best sounding portable dacs around-
www.soundphilereview.com/reviews/ifi-micro-idsd-black-label-review-1970/
Up to 12 hour battery life, and also has the facility to charge your phone if required.
Boxed with all accessories.
Retail is £600, I'm looking for £300 plus postage.
TECHNICAL SPECIFICATIONS-
Type: Battery/USB-powered headphone amplifier, preamplifier, and high-res DSD and DXD-capable DAC
Inputs: Combination coaxial/optical S/PDIF input/output jack, USB-2.0 ‘OTG’ port with built-in iFi iPurifier technology, and One 3.5mm stereo analogue input.
Outputs: Coaxial S/PDIF jack (uses ‘Intelligent S/PDIF jack for input and output), 6.35mm analogue headphone output jack, One stereo analogue output (via RCA jack) with switch selectable fixed or variable-level outputs, and One USB-type ‘Smart Power’ socket suitable for charging iPhones
Digital formats and data rates supported (all native):
DSD: 512/256/128/64 at rates of 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 kbps
DXD: 2×/1× at rates of 768/705.6/384/352.8 kHz
PCM: Supports rates of 768/705.6/384/352.8/192/176.4/96/88.2/48/44.1kHz
Filters:
DSD: three switch-selectable analogue filters (Extreme/Extended/Standard Range)
DXD: fixed analogue filter (Bit-Perfect Processing)
PCM: three switch-selectable digital filters (Bit-Perfect Processing/Minimum Phase/Standard)
DAC Dynamic Range: >117 dB
DAC Distortion: < 0.003% THD + Noise
Jitter: Below AP2 test set limit
Headphone Amp Power Output: three switch selectable modes, as below.
Turbo Mode: 1560 mW @ 64 Ohms, continuous
166mW @ 600 Ohms, continuous
10V/4000 mW @ 16 Ohms, peak
Normal Mode: 950 mW @ 64 Ohms, continuous
100mW @ 300 Ohms, continuous
5.5V/1900 mW @ 16 Ohms, peak
Eco Mode: 250 mW@ 16 Ohms, continuous
2V/500 mW @ 8 Ohms, peak
Headphone Amp Dynamic Range: >115dB
Headphone Amp Distortion: <0.008% THD + Noise
Dimensions (H×W×D): 28 × 67 × 177mm
Weight: 310 grammes
www.soundphilereview.com/reviews/ifi-micro-idsd-black-label-review-1970/
Up to 12 hour battery life, and also has the facility to charge your phone if required.
Boxed with all accessories.
Retail is £600, I'm looking for £300 plus postage.
TECHNICAL SPECIFICATIONS-
Type: Battery/USB-powered headphone amplifier, preamplifier, and high-res DSD and DXD-capable DAC
Inputs: Combination coaxial/optical S/PDIF input/output jack, USB-2.0 ‘OTG’ port with built-in iFi iPurifier technology, and One 3.5mm stereo analogue input.
Outputs: Coaxial S/PDIF jack (uses ‘Intelligent S/PDIF jack for input and output), 6.35mm analogue headphone output jack, One stereo analogue output (via RCA jack) with switch selectable fixed or variable-level outputs, and One USB-type ‘Smart Power’ socket suitable for charging iPhones
Digital formats and data rates supported (all native):
DSD: 512/256/128/64 at rates of 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 kbps
DXD: 2×/1× at rates of 768/705.6/384/352.8 kHz
PCM: Supports rates of 768/705.6/384/352.8/192/176.4/96/88.2/48/44.1kHz
Filters:
DSD: three switch-selectable analogue filters (Extreme/Extended/Standard Range)
DXD: fixed analogue filter (Bit-Perfect Processing)
PCM: three switch-selectable digital filters (Bit-Perfect Processing/Minimum Phase/Standard)
DAC Dynamic Range: >117 dB
DAC Distortion: < 0.003% THD + Noise
Jitter: Below AP2 test set limit
Headphone Amp Power Output: three switch selectable modes, as below.
Turbo Mode: 1560 mW @ 64 Ohms, continuous
166mW @ 600 Ohms, continuous
10V/4000 mW @ 16 Ohms, peak
Normal Mode: 950 mW @ 64 Ohms, continuous
100mW @ 300 Ohms, continuous
5.5V/1900 mW @ 16 Ohms, peak
Eco Mode: 250 mW@ 16 Ohms, continuous
2V/500 mW @ 8 Ohms, peak
Headphone Amp Dynamic Range: >115dB
Headphone Amp Distortion: <0.008% THD + Noise
Dimensions (H×W×D): 28 × 67 × 177mm
Weight: 310 grammes